0%

    Hybrid-2kW

    • Micro Hybrid Inverter is designed for plug-and-play balcony solar storage systems
    • Dual built-in MPPT and maximum 800w limited programmable AC output.
    • Store the excess solar generation in the battery and smartly supply power for the household by timing and power capacity settings.
    • Bidirectional hybrid inverter provides greater flexibility for charging
      0%

      All-in-one Hybrid-2kW-2.5kWh

      2.5kWh Micro Hybrid All-in-one integrates a battery based on the AC controller.
      Not only does it have all the functions of an AC controller, but its modular design also brings more possibilities.
      Multiple rack-mounted 2.5kWh Micro Hybrid All-in-one can be connected in parallel to achieve information gathering and
      centralized energy management .

      Simple Self-installation

      The micro hybrid series features a simple self-installation design with just dual MPPT inputs for solar modules. A person with basic electrical knowledge can complete the installation in 15 minutes. It can be wall-mounted or placed on the ground in a balcony, garden, small roof, or any other suitable location, requiring only a few PV panels and battery storage.

      ONE PV module wiring diagram, commonly used module power 240W to 540W, up to 720w

      TWO PV module wiring diagram, commonly used module power 240W to 540W, up to 720w

      THREE PV module wiring diagram, commonly used module power 240W to 450W for one MPPT.Please be aware two modules are parallel connected by 2-in-1 MC4 connectors.

      Four PV module wiring diagram, commonly used module power 320W to 450W for one MPPT.Please be aware two modules are parallel connected by 2-in-1 MC4 connectors

      Specifications

      AC controller and battery

      Model

      Hybrid-2kW

      All-in-one Hybrid-2kW-2.5kWh

      PV Input

      Max. input (W)

      2000

      Numbers of MPPTs

      2

      MPPT Voltage Range (V)

      16~50

      Max. input Current (A)
      2 × 25
      Max. input short-circuit current (A)
      2 x 30
      Suggested Module Power (W)
      240 to 500+

      AC Output

      Max. Output (W)

      programmable 800W

      Rated Voltage(V)

      230

      AC Frequency (Hz)

       50

      Battery

      Battery

      Battery Protocol

      Based on Pylontech

      Battery Cell

      Prismatic LiFePO4 50Ah

      Battery Current (A)

      40

      Energy Capacity (kWh)

      2.5

      Battery Voltage (V)
      48/51.2
      Battery Voltage (V)
      48/51.2

      Battery Type

      LFP and BMS needed

      Life Cycling(0.5℃ 25℃)

      6000

      Operation Temperature(℃)

      Chrage:0~45/Discharge:20~45

      General

      Dimensions (mm)

      337 x 217 x 111

      536 x 135 x 455

      Weight (kg)

      5kg

      40kg
      Plug
      MC4
      Placed
      Indoors or Outdoors

      Advanced Features

      solar input 2
      Install
      battery 2
      communication 2
      intelligent
      compatibility

      Scenarios

      four dcdc and acac products image